GVWR | 14,000lb - 21,000lb |
Length | 22 – 32 ft. |
Pull Type | BUMPERPULL OR GOOSENECK |
Tilt Angle | 10° - 13° |
The T8X powered tilt trailer is perfect for users seeking a fully-featured, easy to use trailer with a full-length tilting bed. Raising and lowering the deck is as easy as activating the hydraulic power unit and letting the trailer do the work! It’s even available with a wireless remote for raising and lowering the bed from inside your tow vehicle. The T8X is perfect for hauling equipment with longer wheelbases, tractors with farm implements, or even two small cars.
We build the T8X in 22’, 24’, 28’, and 32’. In the 22’ and 24’ lengths, the T8X features dual cylinder control to keep your load balanced. 28’ and 32’ lengths are upgraded to a full scissor lift for the ultimate in load control while raising and lower the bed.
Width between the fenders on a standard T8X is 83”, and we offer the option of rugged drive over fenders for a full-width use of 102”. No matter which deck length you choose, we designed the T8X with low loading angles for your safety and convenience.
Two Dexter torsion axles come standard on the T8X powered tilt trailer, providing a base GVWR of 14,000 pounds. These torsion axles feature an enhanced warranty over a traditional suspension style and provide a smoother ride and lower deck height. With the right axle options specified, your T8X can feature a max GVWR of 21,000 pounds.
Integrated steps located at the front and rear of each fender provide easy deck access to check or secure your load. These steps also house high-visibility, long-
lasting LED lighting. These ultra-bright LED lights are flush fitting to help prevent damage.
Frames on the T8X powered tilt trailer are made from 6” x 2” x ¼” tubing with 3” channel crossmembers on 12” centers. This close crossmember spacing creates a stiff deck capable of hauling multiple vehicles or pieces of equipment.
Several different flooring options are available on the T8X powered tilt trailer. From the standard treated wood floor to rough oak, diamond plated steel, or the revolutionary Blackwood rubber-infused lumber, you can get a T8X built exactly to your needs.
Like all MAXX-D Trailers, the T8X powered tilt trailer is finished with our industry-leading powder coating process. Six different steps all work together to give your trailer a premium powder-coated steel surface with unmatched durability.
Through our expansive dealer network, we give you the option to configure your T8X powered tilt trailer with a variety of special options to make your life easier. Whether it’s a winch plate and winch, different floor style, or hydraulic jacks, you can get a T8X that’s perfect for whatever it is you’re hauling.
We also offer the T8X in your choice of a bumper pull or gooseneck option. No matter what you need to haul, there’s a T8X in a configuration for you. Build something great with a T8X powered tilt trailer!
The ultimate powered tilt trailer.
The T8X powered tilt trailer is perfect for users seeking a fully-featured, easy to use trailer with a full-length tilting bed. Raising and lowering the deck is as easy as activating the hydraulic power unit and letting the trailer do the work! It’s even available with a wireless remote for raising and lowering the bed from inside your tow vehicle. The T8X is perfect for hauling equipment with longer wheelbases, tractors with farm implements, or even two small cars.
We build the T8X in 22’, 24’, 28’, and 32’. In the 22’ and 24’ lengths, the T8X features dual cylinder control to keep your load balanced. 28’ and 32’ lengths are upgraded to a full scissor lift for the ultimate in load control while raising and lower the bed.
Width between the fenders on a standard T8X is 83”, and we offer the option of rugged drive over fenders for a full-width use of 102”. No matter which deck length you choose, we designed the T8X with low loading angles for your safety and convenience.
Two Dexter torsion axles come standard on the T8X powered tilt trailer, providing a base GVWR of 14,000 pounds. These torsion axles feature an enhanced warranty over a traditional suspension style and provide a smoother ride and lower deck height. With the right axle options specified, your T8X can feature a max GVWR of 21,000 pounds.
Integrated steps located at the front and rear of each fender provide easy deck access to check or secure your load. These steps also house high-visibility, long-lasting LED lighting. These ultra-bright LED lights are flush fitting to help prevent damage.
Frames on the T8X powered tilt trailer are made from 6” x 2” x ¼” tubing with 3” channel crossmembers on 12” centers. This close crossmember spacing creates a stiff deck capable of hauling multiple vehicles or pieces of equipment.
Several different flooring options are available on the T8X powered tilt trailer. From the standard treated wood floor to rough oak, diamond plated steel, or the revolutionary Blackwood rubber-infused lumber, you can get a T8X built exactly to your needs.
Like all MAXX-D Trailers, the T8X powered tilt trailer is finished with our industry-leading powder coating process. Six different steps all work together to give your trailer a premium powder-coated steel surface with unmatched durability.
Through our expansive dealer network, we give you the option to configure your T8X powered tilt trailer with a variety of special options to make your life easier. Whether it’s a winch plate and winch, different floor style, or hydraulic jacks, you can get a T8X that’s perfect for whatever it is you’re hauling.
We also offer the T8X in your choice of a bumper pull or gooseneck option. No matter what you need to haul, there’s a T8X in a configuration for you. Build something great with a T8X powered tilt trailer!
GVWR | 14,000lb - 21,000lb |
Length | 22 – 32 ft. |
Pull Type | BUMPERPULL OR GOOSENECK |
Tilt Angle | 10° - 13° |
22′ X 83″ | T8X8322 |
24′ X 83″ | T8X8324 |
28′ X 83″ | T8X8328 |
32′ X 83″ | T8X8332 |
22′ X 102″ | T8X10222 |
24′ X 102″ | T8X10224 |
28′ X 102″ | T8X10228 |
32′ X 102″ | T8X10232 |
14,000 LB GVWR | STANDARDG10 |
15,600 LB GVWR | G11 |
16,000 LB GVWR | G12 |
17,500 LB GVWR | G13 |
20,000 LB GVWR | G14 |
21,000 LB GVWR | G15 |
2 5/16″ ADJUSTABLE COUPLER | STANDARDC10 |
15K ADJUSTABLE PINTLE EYE | C14 |
2 5/16″ 30K ROUND GN COUPLER | C17 |
30K ROUND GN COUPLER KING PIN | C19 |
1 – 10K DROP-LEG JACK | STANDARDJ04 |
2 – 10K DROP-LEG JACKS ON GN | J05 |
1 – HYDRAULIC JACK | J08 |
2 – HYDRAULIC JACKS ON GN | J20 |
8″ CHANNEL WRAP TONGUE WITH TOOLBOX | STANDARDN16 |
STND HEIGHT I-BEAM NECK | N21 |
6″ EXTENDED HEIGHT RISERS NECK | N22 |
STND HEIGHT I-BEAM NECK WITH RISER BOX | N24 |
6″ EXTENDED HEIGHT RISERS NECK WITH RISER BOX | N25 |
STND HEIGHT I-BEAM NECK WITH DECK-OVER | N27 |
6″ EXTENDED HEIGHT RISERS NECK WITH DECK-OVER | N28 |
6X2 1/4″ TUBE FRAME | STANDARDF102 |
3″ CHANNEL ON 12″ CENTERS | STANDARDX07 |
STAKE POCKETS AND RUBRAIL | STANDARDR03 |
NO STATIONARY/KNIFE EDGE REAR | STANDARDD47 |
2-7K ELECTRIC BRAKE AXLES | STANDARDA24 |
3-7K ELECTRIC BRAKE AXLES | A25 |
2-7K ELECTRIC/HYDRAULIC BRAKE AXLES | A27 |
3-7K ELECTRIC/HYDRAULIC BRAKE AXLES | A28 |
2-8K ELECTRIC BRAKE AXLES | A29 |
TORSION SPRING SUSPENSION 22.5* UP ON 2 AXLES | STANDARDS11 |
ST235/80R16 E RADIAL TIRES | STANDARDT18 |
ST235/85R16 G RADIAL TIRES ON 2-7K | T71 |
ST235/85R16 G RADIAL TIRES ON 3-7K | T27 |
ST215/75R17.5 H RADIAL TIRES ON SINGLES | T29 |
DOUBLE BROKE DIAMOND PLATE FENDERS | STANDARDP06 |
TANDEM AXLE DRIVE-OVER FENDERS | P12 |
TRIPLE AXLE DRIVE-OVER FENDERS | P13 |
2X8 TREATED WOOD FLOOR | STANDARDE04 |
2X8 OAK WOOD FLOOR | E05 |
1/8″ DIAMOND PLATE STEEL FLOOR | E07 |
BLACKWOOD LUMBER | E14 |
FLUSHMOUNT LED’S/STANDARD WIRING | STANDARDL03 |
FLUSHMOUNT LED’S/COLD WEATHER PACKAGE | L04 |
WET BLACK | STANDARDO01 |
MAXX-D GRAY METTALIC | O02 |
BATTLESHIP GRAY | O03 |
INDIGO BLUE METTALIC | O05 |
SIGNAL BLUE | O06 |
RUBY RED METTALIC | O07 |
FLAME RED | O08 |
DESERT TAN | O13 |
KAWASAKI GREEN | O14 |
2x EXTRA 5/8″ BULL-NOSE D-RINGS | Z08 |
4x EXTRA 5/8″ BULL-NOSE D-RINGS | Z09 |
6x EXTRA 5/8″ BULL-NOSE D-RINGS | Z10 |
SPARE ST235/80R16 E RADIAL TIRE | H38 |
SPARE ST235/85R16 G RADIAL TIRE | H47 |
SPARE ST215/75R17.5 H RADIAL TIRE ON SINGLE | H49 |
2-WATT SOLAR PANEL | Y08 |
5-WATT SOLAR PANEL | Y09 |
WIRELESS REMOTE | Y14 |
WINCH PLATE IN FRONT | W01 |
WARRIOR 9.5K WINCH MOUNTED ON PLATE/CHANNEL | W05 |
WARRIOR 12K WINCH MOUNTED ON PLATE/CHANNEL | W09 |
Simplify your trailer purchase by applying for financing before heading to your nearest dealer.
Find your nearest dealer location to contact for availability and pricing information.