| GVWR | 14,000lb - 25,000lb |
| Length | 26 – 40 ft. |
| Pull Type | GOOSENECK OR BUMPERPULL |
TSX – The TSX is the lighter version of our heavy duty TDX tilt trailer. It has a power up and power down scissor lift tilt system and is available in full bed tilt or partial stationary depending on length configurations. It starts with a base of 2-7K Dexter electric brake axles and a GVWR of 14,000 lbs. This trailer is best suited as a light equipment trailer to haul tractors, skid steers, and other small equipment.
INTERESTED IN PURCHASING THIS TRAILER?
TSX SINGLE WHEEL FLATBED TILT GOOSENECK
1 Video
TSX – The TSX is the lighter version of our heavy duty TDX tilt trailer. It has a power up and power down scissor lift tilt system and is available in full bed tilt or partial stationary depending on length configurations. It starts with a base of 2-7K Dexter electric brake axles and a GVWR of 14,000 lbs. This trailer is best suited as a light equipment trailer to haul tractors, skid steers, and other small equipment.
INTERESTED IN PURCHASING THIS TRAILER?
QUICK OVERVIEW
| GVWR | 14,000lb - 25,000lb |
| Length | 26 – 40 ft. |
| Pull Type | GOOSENECK OR BUMPERPULL |
Size Options
| 26′ X 102″ | TSX10226 |
| 28′ X 102″ | TSX10228 |
| 30′ X 102″ | TSX10230 |
| 32′ X 102″ | TSX10232 |
| 34′ X 102″ | TSX10234 |
| 36′ X 102″ | TSX10236 |
| 38′ X 102″ | TSX10238 |
| 40′ X 102″ | TSX10240 |
GVWR OPTIONS
| 14,000 LB GVWR | STANDARDG10 |
| 12,000 LB GVWR | G09 |
| 9,990 LB GVWR | G08 |
| 15,600 LB GVWR | G11 |
| 16,000 LB GVWR | G12 |
| 17,500 LB GVWR | G13 |
| 21,000 LB GVWR | G15 |
| 22,500 LB GVWR | G16 |
| 25,000 LB GVWR | G17 |
COUPLER OPTIONS
| 2 5/16″ 25K ROUND GN COUPLER | STANDARDC17 |
| 2 5/16″ 30K SQUARE LOAD-LEVEL GN COUPLER | C18 |
| 25K ROUND GN COUPLER KING PIN | C19 |
| 30K SQUARE LOAD-LEVEL GN COUPLER KING PIN | C20 |
| 2 5/16″ 25K REAL BULLDOG GN COUPLER | C21 |
| 2 5/16″ 30K REAL BULLDOG GN COUPLER | C22 |
| 2 5/16″ PLATE MOUNT ADJUSTABLE COUPLER | C13 |
| 30K ADJUSTABLE PINTLE EYE | C15 |
JACK OPTIONS
| 2 – 10K DROP-LEG JACKS | STANDARDJ18 |
| 2 – 2-SPEED JOST JACKS | J19 |
| 2 – HYDRAULIC JACKS | J09 |
TONGUE/NECK OPTIONS
| STND HEIGHT I-BEAM NECK | STANDARDN21 |
| 6″ EXTENDED HEIGHT RISERS NECK | N22 |
| STND HEIGHT I-BEAM NECK WITH RISER BOX | N24 |
| 6″ EXTENDED HEIGHT RISERS NECK WITH RISER BOX | N25 |
| STND HEIGHT I-BEAM NECK WITH DECK-OVER | N27 |
| 6″ EXTENDED HEIGHT RISERS NECK WITH DECK-OVER | N28 |
| I-BEAM TONGUE WITH TOOL TRAY | N19 |
| I-BEAM TONGUE WITH TOOLBOX | N20 |
FRAME OPTIONS
| 12″ X 14LB I-BEAM FRAME | STANDARDF39 |
| 12″ X 14LB I-BEAM FRAME WITH BRIDGE | F40 |
| 12″ X 14LB I-BEAM FRAME WITH TORQUE TUBE | F41 |
| 12″ X 14LB I-BEAM FRAME WITH BRIDGE AND TORQUE TUBE | F42 |
| 12″ X 19LB I-BEAM FRAME | F43 |
| 12″ X 19LB I-BEAM FRAME WITH BRIDGE | F44 |
| 12″ X 19LB I-BEAM FRAME WITH TORQUE TUBE | F45 |
| 12″ X 19LB I-BEAM FRAME WITH BRIDGE AND TORQUE TUBE | F46 |
CROSSMEMBER OPTIONS
| 3″ CHANNEL ON 16″ CENTERS | STANDARDX06 |
| 3″ CHANNEL ON 12″ CENTERS | X07 |
SIDES OPTIONS
| 6″ CHANNEL OUTER FRAME | STANDARDR06 |
DOVETAIL OPTIONS
| NO STATIONARY/KNIFE EDGE REAR | STANDARDD47 |
| 2′ STATIONARY/KNIFE EDGE REAR | D48 |
| 4′ STATIONARY/KNIFE EDGE REAR | D49 |
| 6′ STATIONARY/KNIFE EDGE REAR | D50 |
| 8′ STATIONARY/KNIFE EDGE REAR | D51 |
| 10′ STATIONARY/KNIFE EDG REAR | D52 |
| 12′ STATIONARY/KNIFE EDGE REAR | D53 |
AXLE OPTIONS
| 2-7K ELECTRIC BRAKE AXLES | STANDARDA24 |
| 3-7K ELECTRIC BRAKE AXLES | A25 |
| 2-7K ELECTRIC/HYDRAULIC BRAKE AXLES | A27 |
| 3-7K ELECTRIC/HYDRAULIC BRAKE AXLES | A28 |
| 2-8K ELECTRIC BRAKE AXLES | A29 |
| 3-8K ELECTRIC BRAKE AXLES | A30 |
SUSPENSION OPTIONS
| SLIPPER SPRING SUSPENSION | STANDARDS02 |
| TORSION SPRING SUSPENSION 22.5* DOWN ON 2 AXLES | S09 |
| TORSION SPRING SUSPENSION 22.5* DOWN ON 3 AXLES | S12 |
WHEEL/TIRE OPTIONS
| 5x ST235/80R16 E RADIAL TIRES | STANDARDT95 |
| 7x ST235/80R16 E RADIAL TIRES | T96 |
| 5x ST235/85R16 G RADIAL TIRES | T75 |
| 7x ST235/85R16 G RADIAL TIRES | T76 |
| ST215/75R17.5 H RADIAL TIRES ON SINGLES | T29 |
FENDER OPTIONS
| NOT APPLICABLE | STANDARDP14 |
FLOOR OPTIONS
| 2X8 TREATED WOOD FLOOR | STANDARDE04 |
| 2X8 OAK WOOD FLOOR | E05 |
| 1/8″ DIAMOND PLATE STEEL FLOOR | E07 |
| BLACKWOOD LUMBER | E14 |
LIGHTS/WIRING OPTIONS
| FLUSHMOUNT LED’S/STANDARD WIRING | STANDARDL03 |
| FLUSHMOUNT LED’S/COLD WEATHER PACKAGE | L04 |
COLOR OPTIONS
| WET BLACK | STANDARDO01 |
| MAXXD GRAY METTALIC | O02 |
| TRINITY WHITE | O03 |
| INDIGO BLUE METTALIC | O05 |
| SIGNAL BLUE | O06 |
| RUBY RED METTALIC | O07 |
| FLAME RED | O08 |
| BITTERSWEET ORANGE | O09 |
| EQUIPMENT YELLOW | O10 |
| AMAZON GREEN METTALIC | O11 |
| ENVIRO GREEN | O12 |
| WESTERN BEIGE METALLIC | O13 |
D-RING OPTIONS
| 2x EXTRA 3/4″ BULL-NOSE D-RINGS | Z24 |
| 4x EXTRA 3/4″ BULL-NOSE D-RINGS | Z25 |
| 6x EXTRA 3/4″ BULL-NOSE D-RINGS | Z26 |
SLIDING RATCHET OPTIONS
| SLIDING RATCHET BAR ONLY | Z21 |
| SLIDING RATCHET BAR WITH 1 RATCHET PER 2′ | Z22 |
| SLIDING RATCHET BAR WITH 1 RATCHET PER 4′ | Z23 |
WELD-ON RATCHET OPTIONS
| 2x WELD-ON RATCHETS | Z17 |
| 4X WELD-ON RATCHETS | Z18 |
| 6X WELD-ON RATCHETS | Z19 |
| 8X WELD-ON RATCHETS | Z20 |
OTHER OPTIONS
| HOT SHOT BOX | K07 |
| 14″ X 18″ X 24″ SIDE MOUNT TOOLBOX | K08 |
| 14″ X 18″ X 48″ SIDE MOUNT TOOLBOX | K09 |
| WINCH ROLLER | Y11 |
| 8″ WINCH CHANNEL BETWEEN RISERS | W04 |
| WARRIOR 9.5K WINCH MOUNTED ON PLATE/CHANNEL | W05 |
| WARRIOR 12K WINCH MOUNTED ON PLATE/CHANNEL | W09 |
| WARRIOR 17.5K WINCH MOUNTED ON PLATE/CHANNEL | W31 |
| UNDER FRAME TIE-DOWN FLAT | Y10 |
| 2-WATT SOLAR PANEL | Y08 |
| 5-WATT SOLAR PANEL | Y09 |
| WIRELESS REMOTE | Y14 |
GET PRE-APPROVED
Simplify your trailer purchase by applying for financing before heading to your nearest dealer.
GET PRICING
Find your nearest dealer location to contact for availability and pricing information.